|
|
RF Mixer The MMIQ-0416LSM is a low LO drive, passive GaAs MMIC IQ. This is an ultra-broadband mixer spanning 4 to 16GHz on the RF and LO ports with an IF from DC to 6 GHz.
- MMIQ-0416LSM-2
- Marki Microwave
-
1:
Rp3.230.180
-
25In Stock
-
New At Mouser
|
Mouser Part No
10-MMIQ-0416LSM-2
New At Mouser
|
Marki Microwave
|
RF Mixer The MMIQ-0416LSM is a low LO drive, passive GaAs MMIC IQ. This is an ultra-broadband mixer spanning 4 to 16GHz on the RF and LO ports with an IF from DC to 6 GHz.
|
|
25In Stock
|
|
|
Rp3.230.180
|
|
|
Rp2.779.236
|
|
|
Rp2.595.225
|
|
|
View
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Mixer MMIQ-0520HSM is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz.
- MMIQ-0520HSM-2
- Marki Microwave
-
1:
Rp2.953.706
-
25In Stock
-
New At Mouser
|
Mouser Part No
10-MMIQ-0520HSM-2
New At Mouser
|
Marki Microwave
|
RF Mixer MMIQ-0520HSM is a high linearity, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz.
|
|
25In Stock
|
|
|
Rp2.953.706
|
|
|
Rp2.538.903
|
|
|
Rp2.363.148
|
|
|
View
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Mixer The MMIQ-0520LSM is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +5 dBm LO drive level. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz.
- MMIQ-0520LSM-2
- Marki Microwave
-
1:
Rp3.794.320
-
25In Stock
-
New At Mouser
|
Mouser Part No
10-MMIQ-0520LSM-2
New At Mouser
|
Marki Microwave
|
RF Mixer The MMIQ-0520LSM is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +5 dBm LO drive level. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz.
|
|
25In Stock
|
|
|
Rp3.794.320
|
|
|
Rp3.267.423
|
|
|
Rp3.064.149
|
|
|
View
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Mixer The MT3-0113LCQG is a triple balanced passive diode GaAs MMIC mixer offering high dynamic range, low conversion loss, and excellent repeatability.
- MT3-0113LCQG-2
- Marki Microwave
-
1:
Rp6.747.108
-
10In Stock
-
New At Mouser
|
Mouser Part No
10-MT3-0113LCQG-2
New At Mouser
|
Marki Microwave
|
RF Mixer The MT3-0113LCQG is a triple balanced passive diode GaAs MMIC mixer offering high dynamic range, low conversion loss, and excellent repeatability.
|
|
10In Stock
|
|
|
Rp6.747.108
|
|
|
Rp5.755.140
|
|
|
Rp5.575.716
|
|
|
View
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The PBR-0006SMG is a 10 MHz to 6 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 35 dB typical isolation across the operational bandwidth.
- PBR-0006SMG
- Marki Microwave
-
1:
Rp4.039.239
-
10In Stock
-
New At Mouser
|
Mouser Part No
10-PBR-0006SMG
New At Mouser
|
Marki Microwave
|
Signal Conditioning The PBR-0006SMG is a 10 MHz to 6 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 35 dB typical isolation across the operational bandwidth.
|
|
10In Stock
|
|
|
Rp4.039.239
|
|
|
Rp3.903.662
|
|
|
Rp3.897.057
|
|
|
Rp3.896.690
|
|
|
View
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Equalisers The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 11dB.
- MEQ7-20ASM
- Marki Microwave
-
1:
Rp751.452
-
25In Stock
-
New At Mouser
|
Mouser Part No
10-MEQ7-20ASM
New At Mouser
|
Marki Microwave
|
Equalisers The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 11dB.
|
|
25In Stock
|
|
|
Rp751.452
|
|
|
Rp676.967
|
|
|
Rp575.331
|
|
|
Rp557.902
|
|
|
View
|
|
|
Rp538.822
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
- PD-0535SM
- Marki Microwave
-
1:
Rp2.610.269
-
10In Stock
-
New At Mouser
|
Mouser Part No
10-PD-0535SM
New At Mouser
|
Marki Microwave
|
Signal Conditioning 2-Way Wilkinson power dividers can be used for both in-phase power splitting and power combining applications.
|
|
10In Stock
|
|
|
Rp2.610.269
|
|
|
Rp2.500.009
|
|
|
Rp2.499.826
|
|
|
View
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The ADA-2052 can be used as a frequency extender to enhance the frequency range of a <26 GHz synthesizer up to 52 GHz. Useful for lab testing, test and measurement, and prototype systems.
- ADA-2052
- Marki Microwave
-
1:
Rp43.470.480
-
3Expected 25/02/2026
-
New At Mouser
|
Mouser Part No
10-ADA-2052
New At Mouser
|
Marki Microwave
|
Signal Conditioning The ADA-2052 can be used as a frequency extender to enhance the frequency range of a <26 GHz synthesizer up to 52 GHz. Useful for lab testing, test and measurement, and prototype systems.
|
|
3Expected 25/02/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A high-linearity, high gain, low noise distributed amplifier capable of providing +22 dBm output power up to 30 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 30GHz.
- ADM-8006PSM
- Marki Microwave
-
1:
Rp3.480.603
-
25Expected 06/03/2026
-
New Product
|
Mouser Part No
10-ADM-8006PSM
New Product
|
Marki Microwave
|
RF Amplifier A high-linearity, high gain, low noise distributed amplifier capable of providing +22 dBm output power up to 30 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 30GHz.
|
|
25Expected 06/03/2026
|
|
|
Rp3.480.603
|
|
|
Rp3.000.488
|
|
|
Rp2.808.773
|
|
|
View
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A high-linearity, high gain, low noise distributed amplifier capable of providing +23 dBm output power up to 38 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz.
- ADM-8007PSM
- Marki Microwave
-
1:
Rp3.867.337
-
25Expected 06/03/2026
-
New At Mouser
|
Mouser Part No
10-ADM-8007PSM
New At Mouser
|
Marki Microwave
|
RF Amplifier A high-linearity, high gain, low noise distributed amplifier capable of providing +23 dBm output power up to 38 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz.
|
|
25Expected 06/03/2026
|
|
|
Rp3.867.337
|
|
|
Rp3.329.616
|
|
|
Rp3.123.407
|
|
|
View
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier A high-linearity low noise amplifier capable of providing +20 dBm output power up to 10 GHz. The ADM-8095PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
- ADM-8095PSM
- Marki Microwave
-
1:
Rp830.890
-
50Expected 25/02/2026
-
New At Mouser
|
Mouser Part No
10-ADM-8095PSM
New At Mouser
|
Marki Microwave
|
RF Amplifier A high-linearity low noise amplifier capable of providing +20 dBm output power up to 10 GHz. The ADM-8095PSM can serve either as a linear signal amplifier, or as a saturated driver amplifier for H- or S-diode mixers.
|
|
50Expected 25/02/2026
|
|
|
Rp830.890
|
|
|
Rp710.724
|
|
|
Rp680.820
|
|
|
Rp616.976
|
|
|
View
|
|
|
Rp595.878
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.
- ADM1-0026PA
- Marki Microwave
-
1:
Rp26.686.642
-
5Expected 13/03/2026
-
New At Mouser
|
Mouser Part No
10-ADM1-0026PA
New At Mouser
|
Marki Microwave
|
Signal Conditioning The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.
|
|
5Expected 13/03/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Amplifier The ADM2-0035PA is an LO driver amplifier module with 2 internally connected wideband gain stages and equalization. It is designed to provide sufficient gain and output power for Marki S-diode mixers below 35 GHz with an input power of 0-5 dBm.
- ADM2-0035PA
- Marki Microwave
-
1:
Rp39.623.140
-
3Expected 25/02/2026
-
New At Mouser
|
Mouser Part No
10-ADM2-0035PA
New At Mouser
|
Marki Microwave
|
RF Amplifier The ADM2-0035PA is an LO driver amplifier module with 2 internally connected wideband gain stages and equalization. It is designed to provide sufficient gain and output power for Marki S-diode mixers below 35 GHz with an input power of 0-5 dBm.
|
|
3Expected 25/02/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm.
- AMM-6702UC
- Marki Microwave
-
1:
Rp31.889.751
-
3Expected 25/02/2026
-
New At Mouser
|
Mouser Part No
10-AMM-6702UC
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband MMIC LO buffer amplifier that efficiently provides high gain and output power over a 20-55 GHz frequency band. It is designed to provide a strong, flat output power response when driven with an input power at 0 dBm.
|
|
3Expected 25/02/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The AQA-2156 is an amplified frequency multiplier that quadruples the 5.25 14 GHz input frequency, producing an amplified 21 - 56 GHz quadrupled output frequency.
- AQA-2156
- Marki Microwave
-
1:
Rp63.611.453
-
3Expected 13/03/2026
-
New At Mouser
|
Mouser Part No
10-AQA-2156
New At Mouser
|
Marki Microwave
|
Signal Conditioning The AQA-2156 is an amplified frequency multiplier that quadruples the 5.25 14 GHz input frequency, producing an amplified 21 - 56 GHz quadrupled output frequency.
|
|
3Expected 13/03/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
- BAL-0003
- Marki Microwave
-
1:
Rp16.317.850
-
5Expected 13/03/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0003
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 3 GHz bandwidth.
|
|
5Expected 13/03/2026
|
|
|
Rp16.317.850
|
|
|
Rp16.112.925
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
- BAL-0006
- Marki Microwave
-
1:
Rp18.182.904
-
10Expected 25/02/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0006
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
|
|
10Expected 25/02/2026
|
|
|
Rp18.182.904
|
|
|
Rp17.954.496
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
- BAL-0006SMG
- Marki Microwave
-
1:
Rp4.218.846
-
40Expected 25/02/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0006SMG
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
|
|
40Expected 25/02/2026
|
|
|
Rp4.218.846
|
|
|
Rp4.081.068
|
|
|
Rp4.071.895
|
|
|
Rp4.071.344
|
|
|
View
|
|
|
Quote
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 9 GHz bandwidth.
- BAL-0009SMG
- Marki Microwave
-
1:
Rp5.295.023
-
30Expected 25/02/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0009SMG
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 9 GHz bandwidth.
|
|
30Expected 25/02/2026
|
|
|
Rp5.295.023
|
|
|
Rp5.228.243
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 12 GHz bandwidth.
- BAL-0012SSG
- Marki Microwave
-
1:
Rp6.678.311
-
20Expected 25/02/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0012SSG
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 12 GHz bandwidth.
|
|
20Expected 25/02/2026
|
|
|
Rp6.678.311
|
|
|
Rp6.594.286
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 20 GHz bandwidth.
- BAL-0020SLG
- Marki Microwave
-
1:
Rp7.341.335
-
20Expected 25/02/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0020SLG
New At Mouser
|
Marki Microwave
|
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 20 GHz bandwidth.
|
|
20Expected 25/02/2026
|
|
|
Rp7.341.335
|
|
|
Rp7.249.055
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
- BAL-0026
- Marki Microwave
-
1:
Rp53.708.832
-
3Expected 25/02/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0026
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BAL-0026 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 26.5 GHz bandwidth.
|
|
3Expected 25/02/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The BAL-0032SSG is a surface-mount broadband balun, hand-tuned for optimal phase and amplitude balance over an industry leading 10 MHz to 32 GHz bandwidth.
- BAL-0032SSG
- Marki Microwave
-
1:
Rp8.517.314
-
20Expected 25/02/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0032SSG
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BAL-0032SSG is a surface-mount broadband balun, hand-tuned for optimal phase and amplitude balance over an industry leading 10 MHz to 32 GHz bandwidth.
|
|
20Expected 25/02/2026
|
|
|
Rp8.517.314
|
|
|
Rp8.410.173
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
- BAL-0036
- Marki Microwave
-
1:
Rp78.885.048
-
2Expected 10/04/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0036
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BAL-0036 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 36 GHz bandwidth.
|
|
2Expected 10/04/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Signal Conditioning The BAL-0067 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 67 GHz bandwidth.
- BAL-0067
- Marki Microwave
-
1:
Rp109.096.324
-
2Expected 25/02/2026
-
New At Mouser
|
Mouser Part No
10-BAL-0067
New At Mouser
|
Marki Microwave
|
Signal Conditioning The BAL-0067 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 67 GHz bandwidth.
|
|
2Expected 25/02/2026
|
|
Min.: 1
Mult.: 1
|
|
|
