|
|
SparkFun Accessories Stackable Header 2x23 Pin Female
- PRT-12790
- SparkFun
-
1:
Rp71.366
-
173In Stock
|
Mouser Part No
474-PRT-12790
|
SparkFun
|
SparkFun Accessories Stackable Header 2x23 Pin Female
|
|
173In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
- PRT-12807
- SparkFun
-
1:
Rp14.677
-
49In Stock
|
Mouser Part No
474-PRT-12807
|
SparkFun
|
SparkFun Accessories This is a simple 2x3 male PTH header. This header is in the common configuration for an ISP connector. Each pin has a spacing of 0.1" in between each other.Documents:Datasheet
|
|
49In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
- PRT-15187
- SparkFun
-
1:
Rp52.286
-
49In Stock
|
Mouser Part No
474-PRT-15187
|
SparkFun
|
SparkFun Accessories These stackable headers are made to work with the SparkFun ESP32 Thing Plus to connect to shield with a Feather footprint. This set includes one 12-pin and one 16-pin header; the pins are spaced by 0.1".Each set of headers allows you to stack Feather
|
|
49In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Soldering Iron Stand
- TOL-09477
- SparkFun
-
1:
Rp142.182
-
2In Stock
|
Mouser Part No
474-TOL-09477
|
SparkFun
|
SparkFun Accessories Soldering Iron Stand
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide
- WRL-00145
- SparkFun
-
1:
Rp274.273
-
3In Stock
|
Mouser Part No
474-WRL-00145
|
SparkFun
|
SparkFun Accessories 2.4GHz Duck Antenna 2.2dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. 4" long. Not sure which RF connector you need on your antenna? Check out our RF Connector Guide
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector.
- WRL-00558
- SparkFun
-
1:
Rp339.401
-
6In Stock
|
Mouser Part No
474-WRL-00558
|
SparkFun
|
SparkFun Accessories Need range? 2.4GHz Large Duck Antenna 5dBi with Reverse Polarized - SMA RF connector. Perfect for prototyping with our RF ICs. 50 ohm impedance. This antenna mates nicely with the Reverse Polarized SMA Connector.
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA.
- WRL-09143
- SparkFun
-
1:
Rp215.932
-
77In Stock
|
Mouser Part No
474-WRL-09143
|
SparkFun
|
SparkFun Accessories 900/1800 MHz Duck Antenna 2dBi with regular RP-SMA RF connector. Perfect for use with the XBee 900MHz units. 50 ohm impedance. 105mm long. Be sure to pick the antenna with the right connector. Almost all 2.4GHz and 915MHz antennas need to be RP-SMA.
|
|
77In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas.
- WRL-09145
- SparkFun
-
1:
Rp105.490
-
90In Stock
|
Mouser Part No
474-WRL-09145
|
SparkFun
|
SparkFun Accessories This is a 4" connector cable that interfaces U.FL RF connectors to regular SMA connectors. This cable is commonly used to connect larger GPS antennas and quad-band cellular antennas.
|
|
90In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
- WRL-15114
- SparkFun
-
1:
Rp50.452
-
51In Stock
|
Mouser Part No
474-WRL-15114
|
SparkFun
|
SparkFun Accessories This cute little coax is a champ in our RF kit! It has a right angle female U.FL (aka I-PEX) connector on both ends. Now instead of jerry-rigging a few U.FL to SMA cables together we can go straight from one U.FL device to another. As an added bonus
|
|
51In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Terminals Quick Disconnects- Female 1/4 Pk of 5
- PRT-14407
- SparkFun
-
1:
Rp11.008
-
348In Stock
|
Mouser Part No
474-PRT-14407
|
SparkFun
|
Terminals Quick Disconnects- Female 1/4 Pk of 5
|
|
348In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Educational Kits We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
- PRT-09353
- SparkFun
-
1:
Rp200.889
-
24In Stock
|
Mouser Part No
474-PRT-09353
|
SparkFun
|
Educational Kits We love heat shrink! We use it for all sorts of handy projects. Use it to reinforce connections protect devices and electrically isolate exposed solder joints. We worked with a manufacturer to create a kit that we would use: lots of colors lots of
|
|
24In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer greater PCB savings while enabling high-frequency mating in data consumer and other I/O applications
- CAB-16905
- SparkFun
-
1:
Rp119.249
-
258In Stock
|
Mouser Part No
474-CAB-16905
|
SparkFun
|
SparkFun Accessories This USB 2.0 Type-C cable is perfect for use with your Raspberry Pi 4 and other USB Type C boards. USB Type-C Connectors and Cable Assemblies offer greater PCB savings while enabling high-frequency mating in data consumer and other I/O applications
|
|
258In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
|
|
NFC/RFID Development Tools RFID Tag (125kHz)
- COM-14325
- SparkFun
-
1:
Rp50.452
-
64In Stock
|
Mouser Part No
474-COM-14325
|
SparkFun
|
NFC/RFID Development Tools RFID Tag (125kHz)
|
|
64In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Enclosures for Single Board Computing This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas
- PRT-17867
- SparkFun
-
1:
Rp134.476
-
5In Stock
|
Mouser Part No
474-PRT-17867
|
SparkFun
|
Enclosures for Single Board Computing This MI:pro Protector Case for the BBC micro:bit has been designed to work with both the original micro:bit V1 and the micro:bit V2. These cases feature a four-layer construction style with ability to mount a 2xAAA battery pack to the back of the cas
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
DC Motors These are a pair of right angle hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a ri
- ROB-13258
- SparkFun
-
1:
Rp177.222
-
10In Stock
|
Mouser Part No
474-ROB-13258
|
SparkFun
|
DC Motors These are a pair of right angle hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a ri
|
|
10In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
- SEN-09198
- SparkFun
-
1:
Rp287.665
-
24In Stock
|
Mouser Part No
474-SEN-09198
|
SparkFun
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
|
|
24In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
RF Modules XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throu
- WRL-22629
- SparkFun
-
1:
Rp928.858
-
1In Stock
|
Mouser Part No
474-WRL-22629
|
SparkFun
|
RF Modules XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throu
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED Lighting Development Tools Do not look into the light. You know you want to but boy will you be sorry. 1W per channel RGB High Power LEDs in one aluminum backed package. These LEDs will blow you away. Light them up then put a coffee cup over the LED to keep your eyes from se
- COM-15200
- SparkFun
-
1:
Rp127.505
-
26In Stock
|
Mouser Part No
474-COM-15200
|
SparkFun
|
LED Lighting Development Tools Do not look into the light. You know you want to but boy will you be sorry. 1W per channel RGB High Power LEDs in one aluminum backed package. These LEDs will blow you away. Light them up then put a coffee cup over the LED to keep your eyes from se
|
|
26In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
- SEN-11319
- SparkFun
-
1:
Rp104.389
-
5In Stock
|
Mouser Part No
474-SEN-11319
|
SparkFun
|
NFC/RFID Tags & Transponders This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Headers & Wire Housings This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
- PRT-16581
- SparkFun
-
1:
Rp51.919
-
87In Stock
|
Mouser Part No
474-PRT-16581
|
SparkFun
|
Headers & Wire Housings This is a 2x18 pin female header. Each pin has a spacing of 0.1" in-between each other.This header mates perfectly with the Alchitry Br Prototype Element Board.
|
|
87In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
WiFi Development Tools - 802.11 SparkFun ESP8266 Thing Dev Board
- WRL-13804
- SparkFun
-
1:
Rp371.507
-
4In Stock
|
Mouser Part No
474-WRL-13804
|
SparkFun
|
WiFi Development Tools - 802.11 SparkFun ESP8266 Thing Dev Board
|
|
4In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories Arduino Stackable Header - 6 pin
- PRT-09280
- SparkFun
-
1:
Rp14.677
-
1.219In Stock
-
400Expected 08/10/2026
|
Mouser Part No
474-PRT-09280
|
SparkFun
|
SparkFun Accessories Arduino Stackable Header - 6 pin
|
|
1.219In Stock
400Expected 08/10/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Magnetic/Reed Switches This is a small device called a reed switch. When the device is exposed to a magnetic field the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed the reeds separate and the switch opens.
- COM-10601
- SparkFun
-
1:
Rp64.211
-
8In Stock
|
Mouser Part No
474-COM-10601
|
SparkFun
|
Magnetic/Reed Switches This is a small device called a reed switch. When the device is exposed to a magnetic field the two ferrous materials inside the switch pull together and the switch closes. When the magnetic field is removed the reeds separate and the switch opens.
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
- SEN-09199
- SparkFun
-
1:
Rp287.665
-
3In Stock
|
Mouser Part No
474-SEN-09199
|
SparkFun
|
Board Mount Motion & Position Sensors The Minisense 100 from Measurement Specialties is a low-cost cantilever-type vibration sensor loaded by a mass to offer high sensitivity at low frequencies. Useful for detecting vibration and 'tap' inputs from a user. A small AC and large voltage (up
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
SparkFun Accessories For the times when all you need is a basic SD card this is the card for you. 1GB capacity is plenty to store MP3s or log environmental data and still dwarfs older memory systems like magnetic core memory. This card is not the Ferrari of SD technolog
- COM-15107
- SparkFun
-
1:
Rp162.912
-
24In Stock
|
Mouser Part No
474-COM-15107
|
SparkFun
|
SparkFun Accessories For the times when all you need is a basic SD card this is the card for you. 1GB capacity is plenty to store MP3s or log environmental data and still dwarfs older memory systems like magnetic core memory. This card is not the Ferrari of SD technolog
|
|
24In Stock
|
|
Min.: 1
Mult.: 1
|
No
|
|
