|
|
Sensor Fixings & Accessories MULTI-BEAM: Test Module; May be used with all 2- 3- and 4-wire MULTI-BEAM; sensors to check operation of sensor block; and power block
- LMT
- Banner Engineering
-
1:
Rp2.843.630
-
2In Stock
|
Mouser Part No
778-LMT
|
Banner Engineering
|
Sensor Fixings & Accessories MULTI-BEAM: Test Module; May be used with all 2- 3- and 4-wire MULTI-BEAM; sensors to check operation of sensor block; and power block
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories EZ-SCREEN Low Profile Accessory Bracket: End Mount; Includes Two Brackets and Hardware; Rotation: 360 Degrees; 14 ga Steel, Black Zinc Plated
- LPA-MBK-11
- Banner Engineering
-
1:
Rp476.996
-
8In Stock
|
Mouser Part No
778-LPA-MBK-11
|
Banner Engineering
|
Sensor Fixings & Accessories EZ-SCREEN Low Profile Accessory Bracket: End Mount; Includes Two Brackets and Hardware; Rotation: 360 Degrees; 14 ga Steel, Black Zinc Plated
|
|
8In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories Remote Sensor: Emitter; Range: 2.4 m; Use Amps: MICRO: MA3-4 MA3-4P; MAXI: CM Series; 2 m (6.5 ft) Cable
- LR300
- Banner Engineering
-
1:
Rp1.779.562
-
6In Stock
|
Mouser Part No
778-LR300
|
Banner Engineering
|
Sensor Fixings & Accessories Remote Sensor: Emitter; Range: 2.4 m; Use Amps: MICRO: MA3-4 MA3-4P; MAXI: CM Series; 2 m (6.5 ft) Cable
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories Accessory: 3 in Shield LX
- LXS3
- Banner Engineering
-
1:
Rp660.456
-
3In Stock
|
Mouser Part No
778-LXS3
|
Banner Engineering
|
Sensor Fixings & Accessories Accessory: 3 in Shield LX
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories MICRO-AMP MPC3 Series: Amplifier Module; Range: Depends on Sensor; Input: 5 V dc +/- 10; Output: Complementary (SPDT) Buffered CMOS Gates; ON/OFF (No Timing)
- MPC3
- Banner Engineering
-
1:
Rp2.990.398
-
7In Stock
-
8Expected 10/08/2026
|
Mouser Part No
778-MPC3
|
Banner Engineering
|
Sensor Fixings & Accessories MICRO-AMP MPC3 Series: Amplifier Module; Range: Depends on Sensor; Input: 5 V dc +/- 10; Output: Complementary (SPDT) Buffered CMOS Gates; ON/OFF (No Timing)
|
|
7In Stock
8Expected 10/08/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories OPTO-TOUCH: Yellow Field Cover; Prevents unwanted activation of OPTO-TOUCH button; Material: Polypropylene Copolymer; Capable of absorbing high impacts
- OTC-1-YW
- Banner Engineering
-
1:
Rp403.612
-
6In Stock
|
Mouser Part No
778-OTC-1-YW
|
Banner Engineering
|
Sensor Fixings & Accessories OPTO-TOUCH: Yellow Field Cover; Prevents unwanted activation of OPTO-TOUCH button; Material: Polypropylene Copolymer; Capable of absorbing high impacts
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories MULTI-BEAM: 3 and 4 wire power block; Range: depends on sensor; Input: 105-130 V ac; Output: For emitters only; Wiring Chamber
- PBA-1
- Banner Engineering
-
1:
Rp1.963.022
-
1In Stock
|
Mouser Part No
778-PBA-1
|
Banner Engineering
|
Sensor Fixings & Accessories MULTI-BEAM: 3 and 4 wire power block; Range: depends on sensor; Input: 105-130 V ac; Output: For emitters only; Wiring Chamber
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories Plastic Fiber; Opposed Mode; Core Dia.: 1.5 mm; Fiber Length 2 m; Thread; Free cut
- PIT66U
- Banner Engineering
-
1:
Rp1.632.794
-
2In Stock
|
Mouser Part No
778-PIT66U
|
Banner Engineering
|
Sensor Fixings & Accessories Plastic Fiber; Opposed Mode; Core Dia.: 1.5 mm; Fiber Length 2 m; Thread; Free cut
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories Accessory: Weather Cover QT50R; Weather Cover QT50R; Polycarbonate; Hydrophobic Coating
- QT50RWS
- Banner Engineering
-
1:
Rp1.357.604
-
6In Stock
|
Mouser Part No
778-QT50RWS
|
Banner Engineering
|
Sensor Fixings & Accessories Accessory: Weather Cover QT50R; Weather Cover QT50R; Polycarbonate; Hydrophobic Coating
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 105-130 V ac; Output: SPST Solid-state 2 Wire; Wiring Chamber
- R2PBA
- Banner Engineering
-
1:
Rp4.090.241
-
2In Stock
|
Mouser Part No
778-R2PBA
|
Banner Engineering
|
Sensor Fixings & Accessories MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 105-130 V ac; Output: SPST Solid-state 2 Wire; Wiring Chamber
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Mounting Fixings Bracket: Protective Mounting; Material: 14 Gauge 316 Stainless Steel; For Reflectors only; Hardware included
- RMB100
- Banner Engineering
-
1:
Rp1.044.254
-
1In Stock
|
Mouser Part No
778-RMB100
|
Banner Engineering
|
Mounting Fixings Bracket: Protective Mounting; Material: 14 Gauge 316 Stainless Steel; For Reflectors only; Hardware included
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories Bracket: Protective Mounting; Material: 14 Gauge 316 Stainless Steel; For Reflectors only; Hardware included
- RMB50
- Banner Engineering
-
1:
Rp476.996
-
3In Stock
|
Mouser Part No
778-RMB50
|
Banner Engineering
|
Sensor Fixings & Accessories Bracket: Protective Mounting; Material: 14 Gauge 316 Stainless Steel; For Reflectors only; Hardware included
|
|
3In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 105-130 V ac; Output: Not Applicable - for Emitters; Wiring Chamber
- RPBA-1
- Banner Engineering
-
1:
Rp3.889.352
-
2In Stock
|
Mouser Part No
778-RPBA-1
|
Banner Engineering
|
Sensor Fixings & Accessories MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 105-130 V ac; Output: Not Applicable - for Emitters; Wiring Chamber
|
|
2In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 12-30 V dc - 12-250 V ac; Output: SPST Electromechanical Relay; Wiring Chamber
- RPBR
- Banner Engineering
-
1:
Rp3.540.778
-
1In Stock
|
Mouser Part No
778-RPBR
|
Banner Engineering
|
Sensor Fixings & Accessories MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 12-30 V dc - 12-250 V ac; Output: SPST Electromechanical Relay; Wiring Chamber
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 10-30 V dc; Output: Bi-Polar: 1 NPN; 1 PNP; Wiring Chamber
- RPBT
- Banner Engineering
-
1:
Rp2.953.706
-
1In Stock
|
Mouser Part No
778-RPBT
|
Banner Engineering
|
Sensor Fixings & Accessories MAXI-BEAM: Power Block; Range: Depends on Sensor; Input: 10-30 V dc; Output: Bi-Polar: 1 NPN; 1 PNP; Wiring Chamber
|
|
1In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories RSD Series Remote Display; Single Sensor Support; Output: Depends on Sensor; 150 mm (6 in) 5-pin M12 PVC Pigtail
- RSD1QP
- Banner Engineering
-
1:
Rp5.246.956
-
2In Stock
-
2Expected 09/09/2026
|
Mouser Part No
778-RSD1QP
|
Banner Engineering
|
Sensor Fixings & Accessories RSD Series Remote Display; Single Sensor Support; Output: Depends on Sensor; 150 mm (6 in) 5-pin M12 PVC Pigtail
|
|
2In Stock
2Expected 09/09/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories MAXI-BEAM: Wiring Base; Range: Depends on sensor; Input: on Power Block; Output: Depends on the Power Block; Wiring Chamber
- RWB4
- Banner Engineering
-
1:
Rp935.646
-
5In Stock
-
6Expected 19/08/2026
|
Mouser Part No
778-RWB4
|
Banner Engineering
|
Sensor Fixings & Accessories MAXI-BEAM: Wiring Base; Range: Depends on sensor; Input: on Power Block; Output: Depends on the Power Block; Wiring Chamber
|
|
5In Stock
6Expected 19/08/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Sensor Fixings & Accessories Bracket: Sensor Accessory DIN Bracket and Hardware; For 1 DIN Mount Fiber Amplifier
- SA-DIN-BRACKET
- Banner Engineering
-
1:
Rp201.806
-
6In Stock
|
Mouser Part No
778-SA-DIN-BRACKET
|
Banner Engineering
|
Sensor Fixings & Accessories Bracket: Sensor Accessory DIN Bracket and Hardware; For 1 DIN Mount Fiber Amplifier
|
|
6In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Mounting Fixings Accessory: Mounting base adapter/cover; Material: ABS; 1/2 in NPSM/DN15 pipe and 30 mm (1-3/16 in) drilled hole; Mounting hardware included
- SA-E12M30
- Banner Engineering
-
1:
Rp440.304
-
37In Stock
|
Mouser Part No
778-SA-E12M30
|
Banner Engineering
|
Mounting Fixings Accessory: Mounting base adapter/cover; Material: ABS; 1/2 in NPSM/DN15 pipe and 30 mm (1-3/16 in) drilled hole; Mounting hardware included
|
|
37In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Mounting Fixings Accessory: Mounting Base 70 mm diameter; Material: Black Painted Zinc; 1/2 in NPSM/DN15 Pipe; Mounting Fixings Included
- SA-F12
- Banner Engineering
-
1:
Rp513.688
-
24In Stock
-
66Expected 24/08/2026
|
Mouser Part No
778-SA-F12
|
Banner Engineering
|
Mounting Fixings Accessory: Mounting Base 70 mm diameter; Material: Black Painted Zinc; 1/2 in NPSM/DN15 Pipe; Mounting Fixings Included
|
|
24In Stock
66Expected 24/08/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Mounting Fixings Accessory: Mounting Base 70 mm diameter- 3 Mounting Holes; Material: Black Polycarbonate; 1/2 in NPSM/DN15 pipe; Mounting hardware included
- SA-F12-3
- Banner Engineering
-
1:
Rp348.574
-
17In Stock
|
Mouser Part No
778-SA-F12-3
|
Banner Engineering
|
Mounting Fixings Accessory: Mounting Base 70 mm diameter- 3 Mounting Holes; Material: Black Polycarbonate; 1/2 in NPSM/DN15 pipe; Mounting hardware included
|
|
17In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
Mounting Fixings SA-FFB12 Bracket: Flush Foldable Bracket for use with Elevated Mount Systems
- SA-FFB12
- Banner Engineering
-
1:
Rp715.494
-
10In Stock
-
16On Order
|
Mouser Part No
778-SA-FFB12
|
Banner Engineering
|
Mounting Fixings SA-FFB12 Bracket: Flush Foldable Bracket for use with Elevated Mount Systems
|
|
10In Stock
16On Order
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED Mounting Hardware SA-M30 Steamlined Black Acetal Stand-Off Pipe Adapter/Cover with M30 x 1.5 Threads for use with K70 and K90 EZ-Light
- SA-M30
- Banner Engineering
-
1:
Rp440.304
-
12In Stock
-
13Expected 21/09/2026
|
Mouser Part No
778-SA-M30
|
Banner Engineering
|
LED Mounting Hardware SA-M30 Steamlined Black Acetal Stand-Off Pipe Adapter/Cover with M30 x 1.5 Threads for use with K70 and K90 EZ-Light
|
|
12In Stock
13Expected 21/09/2026
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED Mounting Hardware SA-M30E12 Streamlined Black Acetal Stand-Off Pipe Adapter/Cover with M30 x 1.5 Threads for use with K50 EZ-LIGHT
- SA-M30E12
- Banner Engineering
-
1:
Rp440.304
-
18In Stock
|
Mouser Part No
778-SA-M30E12
|
Banner Engineering
|
LED Mounting Hardware SA-M30E12 Streamlined Black Acetal Stand-Off Pipe Adapter/Cover with M30 x 1.5 Threads for use with K50 EZ-LIGHT
|
|
18In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
|
|
LED Mounting Hardware Stand-off Pipe Adapter/Cover; Material: Acetal; Connects Between TL50 and M20/DN15 Pipe; O-Ring Included
- SA-M30M20O
- Banner Engineering
-
1:
Rp660.456
-
5In Stock
|
Mouser Part No
778-SA-M30M20O
|
Banner Engineering
|
LED Mounting Hardware Stand-off Pipe Adapter/Cover; Material: Acetal; Connects Between TL50 and M20/DN15 Pipe; O-Ring Included
|
|
5In Stock
|
|
Min.: 1
Mult.: 1
|
|
|
Indonesia
